Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Fort Worth: What to Know First
We provide independent Olympia Chimney fireplace services across Fort Worth, from gas fireplace tune-ups in Westover Hills to firebox rebuilds in Fairmount. Most Olympia Chimney jobs are diagnosed, quoted in writing, and completed within one to three business days - no “call for pricing,” no surprise charges after the truck arrives. Our NFPA 211 Level 2 inspection with camera scan and photo record is included on every visit, and your written price, scope, and warranty are delivered before any work starts.
This page is for Olympia Chimney owners in Fort Worth who need fireplace service, repair, or conversion - whether your gas insert won’t stay lit, your wood-burning firebox is showing cracks, or you’re weighing a liner replacement against a full insert upgrade. Call (682) 499-2712 for a free written estimate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 1000 Series Inserts: Pilot Assembly Carbon Fouling - The 1000 Series direct-vent gas inserts, common in 2015-2019 builds near the Cultural District, use a SIT 820 Nova millivolt pilot that collects ceramic dust from Fort Worth’s caliche-heavy soil during shoulder-season startups. The pilot lights, then drops out after ten minutes. We pull the assembly, clean the orifice with a #79 drill bit (never a wire brush - that widens the orifice and voids the warranty), test thermopile output at 325 mV minimum, and replace only if readings fall below spec. OEM SIT pilots run $140-$190; we stock them because big-box aftermarket copies fail within two seasons.
- Olympia 2000 Series Wood-Burning Fireplaces: Refractory Panel Spalling - The 2000 Series zero-clearance wood units shipped with medium-duty refractory panels rated to 2100°F, but Fort Worth’s sudden temperature swings - 80°F afternoons dropping to 35°F nights in January - thermal-shock the panels at the firebox corners. Spalling (surface flaking) exposes the steel wrapper. We measure panel thickness at nine points per NFPA 211; anything under 1/4″ gets replaced with Olympia’s upgraded 3000°F panels or HeatShield refractory resurfacing if the steel shell is intact. The camera doesn’t lie - and neither does the written estimate.
- Olympia Flex 316Ti Liners: Creosote Glazing at Elbows - Flex 316Ti liners, popular in Fort Worth’s 1920s-1950s chimney retrofits, develop glazed creosote at the 30° and 45° elbows where the flue turns to meet the thimble. Olympia’s corrugated design traps condensate in the valleys; after three seasons without sweeping, Class III glazed creosote forms a glassy shell that standard brushes won’t touch. We rotary-flail with custom poly whips first, then follow with mechanical chain knocking if the camera shows remaining buildup. Clause 4 of the Haven Standard requires the photo record, so you see the elbow before and after.
- Olympia 3000 Series Direct-Vents: Blower Motor Bearing Failure - The 3000 Series uses a Fasco 7021 blower assembly with sleeve bearings that dry out after 4-6 seasons of Fort Worth dust and intermittent use. Homeowners report a grinding whine that stops when they turn off the fan switch. We test amperage draw against the 1.8A nameplate; anything over 2.2A means bearing drag. OEM Fasco replacements are $220-$280 installed. We also stock the quieter ball-bearing upgrade from Gelco that fits the same housing - we quote both, and the customer chooses.
- Olympia Chimney Caps: Galvanized-Steel Rust-Through - Olympia’s standard galvanized caps, spec’d for northern climates, fail fast in Fort Worth’s humidity plus occasional hail. We see rust perforation at the lid seams in three to four years, not the ten-year life the box claims. Water drips down the flue, stains the smoke chamber, and rusts the damper hardware. We replace with stainless or copper caps from Famco or Copperfield - same flue fit, proper Fort Worth weather rating, and we document the old cap’s condition in your photo record.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule. A live person answers, 24/7. We book your NFPA 211 Level 2 inspection with camera scan. You’ll get a text when your tech is en route - name, photo, license number.
- 2
Inspect and document. Corrine Halstead’s crews camera-scan the full flue, smoke chamber, and firebox. We record liner condition, creosote class, refractory integrity, and gas pressure readings if applicable. Photos and video are saved to your job record.
- 3
Diagnose and quote in writing. We name what we found, what it means, and what it costs. OEM Olympia parts, quality aftermarket alternatives, or compatible upgrades from DuraFlex, HeatShield, or Gelco - each priced separately. You approve in writing before work starts. Haven Standard Clause 1.
- 4
Repair with verified parts. Your tech installs using Olympia-compatible or OEM components sourced through our buying network. Gas pressures are tested; wood-burning units get a draft test and spillage check. No shortcuts.
- 5
Test, photo, and warranty. Final camera run confirms the fix. Your documented photo record is stamped and archived. Written warranty and 365-Day Done Right Promise attached. We clean up, then you pay what was quoted.
BeforeAfterWhat Olympia Chimney Fireplace Services Costs in Fort Worth
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Gas fireplace tune-up (pilot, burner, blower) | $180-$290 | Parts needed; 1000 vs. 3000 Series |
| Refractory panel replacement (wood) | $340-$580 | Panel count; steel wrapper condition |
| Flex liner cleaning with rotary flailing | $260-$420 | Access height; creosote class (I vs. III) |
| Blower motor replacement | $220-$340 | OEM Fasco vs. Gelco ball-bearing upgrade |
| Chimney cap replacement (stainless) | $280-$450 | Flue count; custom vs. standard fit |
| Full insert removal and replacement | $2,800-$4,600 | Gas line work; surround trim; liner adapter |
Every estimate is free, written, and delivered before work starts. Bring us a competitor’s written quote - our Free Second Opinion policy means we’ll review it and tell you straight what’s necessary, what’s not, and what we’d charge for the same scope.
Why Fort Worth Homeowners Call Emberly Chimney Cleaners Fort Worth for Olympia Chimney Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a growing share of our Fort Worth calls are Olympia Chimney products installed during the 2015-2020 building boom. We know the 1000 Series pilot quirks, the 2000 Series panel spalling pattern, and which Flex 316Ti elbows need chain knocking versus a standard sweep. Our materials come through the Haven buying network - DuraFlex liners, HeatShield refractory, Gelco blowers, plus Olympia-compatible OEM when it matters for warranty.
Your tech is background-checked, uniformed, and named before arrival. Your price is written before work starts. Your photo record is Clause 4 standard, not an upsell. And if we don’t get it right, the 365-Day Done Right Promise means we make it right. No voicemail trees, no pricing games, no “call for a quote.” That’s the Haven Standard.
FAQs
No - as an independent Olympia Chimney service provider, we use OEM or warranty-compatible parts and document everything. Manufacturer warranties cover defects in materials and workmanship, not who performs routine service. We note serial numbers, part numbers, and installation dates in your written record so any future warranty claim has full documentation. Call (682) 499-2712 if you need a specific part verified before we order.
Common items - 1000 Series pilots, 3000 Series blowers, standard refractory panels - are in our Fort Worth warehouse or available next-day through our Haven network. Specialty orders from Olympia’s distribution center typically arrive in three to five business days. We never start work until parts are in hand and your written quote is approved. If timing matters for your burning season, tell us when you call.
Replace when the steel firebox wrapper is compromised, the liner is damaged beyond spot repair, or repair costs exceed 60% of a new insert installed. Repair when the issue is isolated - a failed blower, cracked refractory, or dirty pilot - and the heat exchanger passes our camera inspection. We show you the footage, explain the numbers, and quote both paths. No work starts until you choose in writing.
Gas fireplaces: annually, before first use, to check burner orifices, gas pressure, and venting integrity. Wood-burning units: after every cord of wood burned, or annually minimum, per NFPA 211. Fort Worth’s mild winters mean some owners stretch this - but our camera finds creosote glazing and refractory damage that a homeowner can’t see from the hearth. The inspection itself is the cheap part.
Delayed maintenance turns into bigger bills: a dirty pilot becomes a failed gas valve ($180 fix becomes $640), dust-choked blowers seize and crack the housing, and deferred burner cleaning causes sooting that stains the surround. Carbon monoxide risk rises if the vent is partially blocked - we test CO levels and draft pressure on every gas service call. Call (682) 499-2712 for a free written estimate and camera inspection.
Written by Corrine Halstead, Owner, Emberly Chimney Cleaners Fort Worth at Emberly Chimney Cleaners Fort Worth, serving Fort Worth and nearby areas.