A Emberly company - serving Fort Worth, TX

Olympia Chimney Chimney Cap Installation Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Olympia Chimney Chimney Cap Installation: The Fort Worth Owner’s Guide

We stock and install Olympia Chimney-compatible chimney caps across Fort Worth, with most residential replacements running $285-$520 installed depending on flue size, cap style, and whether the existing flue tile needs repair before mounting. Single-flue galvanized caps sit at the lower end; multi-flue stainless or copper models with integrated mesh screens run higher. We carry common Olympia Chimney cap sizes on hand and can typically match your flue configuration without a special order.

Call (682) 499-2712

Most Fort Worth owners discover their chimney cap has failed during our annual sweep, or after a storm - the mesh has rusted through, the lid has blown off entirely, or water is pooling inside the firebox. In neighborhoods like Arlington Heights and Ridglea, where mature oaks drop debris year-round, a missing or damaged cap often shows up first as a draft problem or a musty smell after rain.

Which Olympia Chimney Models This Applies To

Olympia Chimney manufactures caps designed for their own factory-built chimney systems as well as universal-fit caps that mount to standard clay flue tiles. If your home has an Olympia Chimney stainless steel chimney system - common in Fort Worth new construction from 2005 to 2018 - the cap will have a stamped model prefix (OC-SS or OC-GV series) on the underside of the lid or on a tag at the mesh base. Universal caps fit flue tiles measuring 8×8, 8×12, 13×13, or 13×17 inches, which covers most Olympia Chimney installations in Texas.

The OEM Olympia Chimney cap uses 304 stainless mesh with a specific crimp pattern that mates to their flue collar. Aftermarket equivalents from Gelco or Famco match this fit but vary in mesh gauge - we stock both and will show you the difference. One compatibility gotcha: early OC-SS systems (pre-2012) used a slightly narrower flue collar radius. A standard universal cap will seat but may gap at the corners, which is how water gets in. We measure before we quote.

Emberly Chimney Cleaners Fort Worth is an independent service provider, not affiliated with Olympia Chimney. We source through Haven’s buying network, which includes Olympia Chimney, Gelco, and Famco - procured specifically to keep customer prices honest.

Signs Your Olympia Chimney Chimney Cap Is Failing

Professional chimney sweep cleaning a residential brick chimney flue
Signs Your Olympia Chimney Chimney Cap Is Failing
  • Rust stains running down the chimney exterior. Olympia Chimney caps use 304 stainless, but the spot-welded corners and mesh base are failure points in Fort Worth’s combination of humid springs and hard-water rain. Once rust breaches the mesh, the cap is no longer protecting the flue.
  • Water in the firebox or rust on the damper. This means the cap lid has cracked, shifted, or blown off entirely. In Tarrant County, we see this most often after wind events in March and April, when caps that were already loose finally let go.
  • Birds, squirrels, or nesting debris in the flue. Mesh screens on Olympia Chimney caps are 5/8-inch weave - fine for sparks, but if corrosion opens a gap at the weld seam, animals treat it as an invitation. We pulled a full squirrel nest from a Ridglea chimney last October; the cap mesh had parted at two corners.
  • Downdraft or smoke spillage on windy days. A cap lid that has bent or lost its struts no longer deflects wind properly. The aerodynamics matter - an Olympia Chimney cap with intact struts creates a venturi effect that actually improves draw. Bent struts do the opposite.
  • Visible gaps between cap base and flue tile. Thermal cycling in Texas summers loosens mounting hardware. The cap may look seated but shifts when you touch it. This is the failure we catch most often during camera inspections - the owner had no idea.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Cap Type Typical Range (Installed) What’s Included
Single-flue galvanized, universal fit $285-$350 Cap, mounting hardware, sealant, labor, photo documentation
Single-flue 304 stainless, Olympia Chimney or equivalent $340-$425 Cap, hardware, sealant, labor, photo documentation, Done Right Promise
Multi-flue stainless with expanded mesh $395-$520 Cap, custom fit to flue layout, hardware, sealant, labor, photo documentation, Done Right Promise
Flue tile repair / rebuild before cap mount Add $150-$280 Crown repair, tile replacement, or mortar rebuild as needed; quoted separately in writing

What drives the range: flue height above the crown (taller requires longer mounting legs), accessibility (steep pitch or second-story stack), and whether the existing flue tile is sound enough to anchor to. We inspect with the camera before we quote - Clause 4 of the Haven Standard requires a photo record on every job, and that includes the condition we’re mounting to. The written price, written scope, and written warranty are delivered before anyone starts. No exceptions.

Every cap installation carries our Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

Professional chimney sweep cleaning a fireplace flue from the rooftop
DIY or Call Us?

Here’s what you can safely check yourself: from ground level with binoculars, confirm the cap is still present and roughly level. Tap the mesh with a long pole - if it flexes excessively or rattles, the welds are failing. Look for rust streaks on the chimney face.

Here’s where DIY goes wrong. Most Fort Worth roofs are composite shingle on 6:12 pitch or steeper - a fall from that height is serious injury or worse. Beyond the height risk, an improperly seated cap gaps at the base and channels water directly into the flue, which is worse than no cap at all. The mounting hardware for Olympia Chimney systems requires a specific torque; over-tighten and you crack the flue tile, under-tighten and the next storm takes it. We don’t recommend owner installation.

Call (682) 499-2712 and we’ll send a named, background-checked technician with the cap size already pulled from our stock. You’ll get a text when they’re on the way, a written price before work starts, and photos of the finished mount.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Chimney Cleaning help in Fort Worth? Licensed & insured · free written estimates
Call (682) 499-2712
Local Service Coverage

Request a Free Estimate in Fort Worth

Tell us what you need - Emberly Chimney Cleaners Fort Worth responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch