Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Fort Worth: What to Know First

We provide independent Famco chimney liner and rebuild service in Fort Worth with written pricing before any work starts and a documented photo record on every job. Most Famco liner replacements and partial rebuilds are completed in one to two days once parts are confirmed, with full rebuilds typically running three to five days depending on weather and masonry cure times. We’re not here to sell you a full rebuild when a liner swap and crown repair will do, and we’ll show you the camera footage to prove it.

Call (682) 499-2712

This page is for Fort Worth homeowners who already know they have a Famco liner, cap, or chimney component and need straight answers on whether it can be repaired, what it costs, and who can do the work without voiding whatever warranty remains. Call (682) 499-2712 for a free estimate with written pricing.

How Famco Products Fail - and How We Fix Them

• Famco SL-Series flexible stainless liners in Fort Worth’s clay-heavy soils often separate at the collar joint where the liner meets the thimble. The clay expands in wet seasons and shifts the masonry surround, stressing that connection. We cut back to sound metal, install a custom-fabricated adapter, and repoint the thimble with high-temp refractory rather than standard mortar.
• Famco rigid 316Ti chimney liner systems develop creosote bridging at the tee connection when installed with insufficient slope toward the cleanout. We see this in Ridglea and River Oaks homes where the original installer prioritized speed over grade. Our fix: pull the tee, regrade the run with proper pitch, and install a sealed cleanout door if one’s missing.
• Famco chimney caps with built-in dampers seize in the open position after five to seven years of Texas sun and sporadic lubrication. The cast-aluminum damper frame warps slightly, and the stainless cable frays at the eyelet. We stock the replacement cable assembly and can rebuild the damper mechanism same-day in most cases, or swap to a Gelco or Olympia cap if the frame is too far gone.
• Famco smoke chamber parging in pre-1980 Fort Worth homes (common in Mistletoe Heights and Berkeley Place) was often applied too thin over soft brick. It spalls and exposes the corbelled brick beneath, creating a fire hazard and draft problems. We parge with Chamber-Tech 2000 or spec a Famco-compatible HeatShield Cerfractory foam application when clearance is tight.
• Famco clay flue tile liners crack vertically during freeze-thaw cycles when water gets behind a failed crown. Fort Worth doesn’t freeze often, but when it does, a saturated liner can split in one night. We camera-scan to map the crack pattern, then sleeve with a Famco-compatible flexible liner or pull the tile and rebuild with poured refractory if the surrounding masonry is sound.

Our Famco Chimney Liner & Rebuild Process

1. 1
   Level 2 camera inspection. We run a chimney camera the full flue length, document liner condition, joint integrity, and any displacement. You get the footage and a written condition report before we discuss price.
2. 2
   Written scope and price. We specify OEM Famco parts versus quality aftermarket alternatives from our buying network, explain the trade-offs, and give you one fixed price. Clause 1 of the Haven Standard: have it in writing before anyone starts.
3. 3
   Parts procurement. Famco-specific collars, tees, and adaptors ship from our network in two to three business days. We confirm fitment by serial number when possible, not by guesswork.
4. 4
   Repair or rebuild execution. Liner pulls are done with controlled descent rigs, not gravity drops that damage the masonry surround. Rebuilds follow NFPA 211 clearance requirements with documented photos at each stage.
5. 5
   Post-work testing and documentation. Smoke test or draft gauge readings, final camera pull to verify liner seating, and a written completion record with photos. Clause 4 of the Haven Standard requires this archive; we’ve done it since 2009.
6. 6
   Warranty registration. We file any remaining Famco warranty paperwork as an independent service provider and give you our 365-Day Done Right Promise in writing.

Before

After

What Famco Chimney Liner & Rebuild Costs in Fort Worth

These are Fort Worth market ranges for the work we actually perform, not national guesses. A chase cover replacement or damper repair can often be bundled to save on mobilization. Every estimate is free, and we offer a free second opinion on any competitor’s written quote. Call (682) 499-2712.

Why Fort Worth Homeowners Call Level Two Chimney Fort Worth for Famco Work

We’ve inspected and documented over 38,000 chimneys since 2009, and a healthy share of those were in Fort Worth neighborhoods where Famco components were spec’d by builders chasing price points in the 2000s and 2010s. Corrine Halstead learned the trade at Apex Technical School in Manhattan, then spent years running crews across Fort Worth before the camera-and-report approach became automatic. The camera doesn’t lie - and neither does the written estimate.

Our techs are background-checked, uniformed, and assigned by name. You get a text when they’re en route. If Famco parts are backordered, we have DuraFlex, HeatShield, and Gelco alternatives pre-vetted for compatibility, and we’ll explain the warranty implications of each. Every job carries the 365-Day Done Right Promise and a documented photo record under Haven Standard Clause 4. Live phone support runs 24/7, and your call reaches a person, not a queue.

FAQs