Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Fireplace Services for Fort Worth Homeowners
Fort Worth Fireplace Services typically cost between $195 and $875 depending on whether you need a routine gas valve tune-up or a full firebox rebuild, and most inspections are completed in 60 to 90 minutes. At Level Two Chimney Fort Worth, we’ve inspected and serviced more than 38,000 fireplaces and chimney systems since 2009, every one with a written price before work started and a documented photo record when finished. Call us at (682) 499-2712 for a free estimate with no obligation to book.
Fort Worth’s freeze-thaw cycles and clay-heavy soils create specific problems you won’t see in drier climates. The limestone aggregate in much of Tarrant County’s older masonry expands and contracts against firebrick, accelerating spalling in fireboxes built before 1990. In neighborhoods like River Oaks and Haltom City, we’ve found gas fireplace ports clogged with caliche dust that settled during the 2011 drought and never cleared. Our technicians run a borescope camera through every gas line inspection and document flue liner condition with photo evidence you receive before any work is authorized. That’s been standard practice here since 2009, written into Clause 4 of the Haven Standard long before insurers began requesting documentation.
Corrine Halstead leads our Fort Worth operation, and every technician who enters your home is background-checked, uniformed, and licensed. You’ll get a text when your tech is en route, a written scope and price before any tools touch your fireplace, and a 365-Day Done Right Promise stamped on every job. We don’t do urgency theatre or pressure closes. We do documented work you can verify yourself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
What Our Fireplace Services Include
Gas Fireplace Service
Gas fireplace service covers burner inspection, thermocouple testing, gas pressure verification, and venting analysis for both direct-vent and vent-free units. You need this annually if you run your gas fireplace more than 20 hours per season, or immediately if you smell any sulfur odor, notice delayed ignition, or see sooting on interior glass. At Level Two Chimney Fort Worth, we pull the burner assembly on every gas service, inspect the orifice with a borescope for spider webs or dust accumulation common in Fort Worth’s windy spring seasons, and test gas pressure at the manifold with a digital manometer. You receive photos of the burner condition, a thermocouple millivolt reading, and a written reassembly report.
Wood Burning Fireplace
Wood burning fireplace service encompasses firebox inspection, damper function testing, smoke chamber evaluation, and creosote classification per NFPA 211 standards. Book this before your first fire each season, or mid-season if you burn more than two cords of hardwood annually, especially with Fort Worth’s abundant post oak and cedar elm that produce Class II and III creosote. Our technicians classify creosote stage on site, use rotary chains or poly brushes matched to your flue liner material, and document liner condition with a camera scan from firebox to crown. In Forest Hill and White Settlement, we regularly find deteriorated parging in smoke chambers of homes built during the 1970s housing boom, a defect that redirects smoke into wall cavities.
Fireplace Insert
Fireplace insert service addresses the unique venting, gasket, and combustion-air requirements of factory-built units installed into existing masonry openings. You need specialized service if your insert was installed without a full liner connection, a common shortcut in Fort Worth’s 2005-2015 renovation wave that creates creosote accumulation in the remaining smoke chamber. We inspect the flex liner connection at both termination and appliance collar, verify gasket integrity on the glass door, and test blower amp draw. Inserts from the 1990s and early 2000s often show corrosion at the flue collar from condensing flue gases, a condition we document with photos and explain in plain terms before recommending repair or replacement.
Damper Repair
Damper repair restores or replaces the metal plate that seals your fireplace from the chimney flue when not in use. A stuck or rusted damper costs Fort Worth homeowners significant conditioned air loss through summer months when attic temperatures exceed 140 degrees, and prevents proper draft initiation in winter. We distinguish between throat dampers, which sit above the firebox and often seize from creosote glazing or handle mechanism failure, and top-sealing dampers that mount at the flue termination. Our repair includes handle mechanism replacement, plate realignment, or full top-damper installation with stainless steel cable systems. We measure the damper opening and document the before-and-after seal with smoke pencil testing.
Firebox Repair
Firebox repair addresses cracked, spalled, or missing firebrick and deteriorated mortar joints that expose surrounding combustibles to direct flame contact. In Fort Worth’s pre-1985 housing stock, particularly in the Mistletoe Heights and Berkeley neighborhoods, we find fireboxes built with common brick rather than ASTM C1261 firebrick, a deficiency that accelerates thermal degradation. Our repair process removes failed material to solid substrate, reinstalls rated firebrick with refractory mortar rated to 2,500°F, and includes a camera inspection of the rear wall cavity to verify no hidden pyrolysis has occurred. For extensive damage, we quote HeatShield cerfractory foam resurfacing or partial rebuild with materials sourced through our Haven buying network.
Fireplace Conversion
Fireplace conversion changes your existing wood-burning or gas system to a different fuel type or venting configuration, most commonly wood-to-gas insert installation or vented gas log conversion. Fort Worth’s air quality considerations and the 2022 Tarrant County burn day restrictions have increased demand for clean-burning gas conversions in areas like Keller and North Richland Hills. Our conversion service includes full NFPA 211 Level 2 inspection of existing flue condition, calculation of required liner sizing for new appliance BTU output, and permit-ready documentation for Fort Worth Building Inspections. We install DuraFlex or Olympia Chimney liner systems sized to manufacturer specification, never generic flex forced into an undersized flue.
Brands We Service for Fireplace Services
We’ve serviced and repaired thousands of HeatShield systems across Tarrant County, from routine resurfacing applications to full smoke chamber parging in historic Fairmount bungalows. Their cerfractory foam technology allows in-situ repair of deteriorated flue liners without full removal, and our technicians are trained in proper application thickness and cure verification. We stock HeatShield primer and mixing equipment and can complete most resurfacing jobs in a single day with full photo documentation of mil thickness.
DuraFlex and Gelco represent the bulk of our liner and termination hardware installations. DuraFlex’s corrugated 316Ti stainless steel handles Fort Worth’s occasional ice accumulation and thermal cycling without the seam failures we’ve seen in lesser products. Gelco’s pre-fabricated chase covers eliminate the crown cracking common in homes with manufactured chimneys in Saginaw and Lake Worth. Whether your fireplace is a HeatShield, DuraFlex, or Gelco system, or any other make from a big-box store install to a historic masonry original, we can inspect it, document it, and repair it with parts sourced through our Haven buying network specifically to keep your price honest.
Before
AfterSigns You Need Fireplace Services Right Now
- Soot or creosote flakes in the firebox or on the hearth. This indicates incomplete combustion or a drafting problem that deposits flammable material inside your home rather than carrying it up the flue. In Fort Worth’s tightly sealed modern construction, negative pressure from HVAC returns can reverse draft flow, a condition we test with a manometer during inspection.
- Smoke entering the room during operation, even with the damper fully open. Smoke spillage means either blocked flue airflow, improper firebox-to-flue ratio, or house depressurization competing with chimney draft. This is not a nuisance; it’s a respiratory hazard and indicates combustion gases including carbon monoxide may also enter living space.
- Cracked, spalling, or missing firebrick with mortar falling into the firebox. Exposed masonry behind firebrick can reach pyrolysis temperatures within hours of normal firing, degrading wood framing separated by only inches. We document this with thermal imaging during our inspection and show you exactly which joints have failed.
- Gas odor, delayed ignition, or yellow-orange flame instead of blue. Any gas smell requires immediate evacuation and utility contact; delayed ignition indicates delayed gas-to-pilot flame contact that can cause flashback. Yellow flame suggests incomplete combustion from dirty orifices or incorrect air shutter setting, producing carbon monoxide at levels dangerous in enclosed Fort Worth family rooms.
- Damper that won’t open fully, won’t close completely, or handle mechanism is broken. A stuck-open damper wastes conditioned air year-round; stuck-closed, it prevents operation entirely and can force combustion gases into the home. Handle failure often indicates underlying plate corrosion we assess with a mirror and flashlight before quoting repair scope.
Our Fireplace Services Process - Step by Step
- 1
Schedule and confirm. Call (682) 499-2712 and speak with a live person, any time of day. We don’t use voicemail trees or web-form callbacks. You’ll receive a text confirmation with your technician’s name and estimated arrival window, plus a link to their license verification.
- 2
Arrival and protection. Your technician arrives in a marked vehicle, uniformed, with floor protection and HEPA vacuum. We inspect the work area for accessibility, confirm the scope you requested, and identify any additional concerns you’ve noticed. No work begins until you’ve reviewed and signed the written scope.
- 3
NFPA 211 Level 2 inspection with camera documentation. We run a borescope camera through the full flue length from firebox to crown, recording liner condition, joint separation, creosote class, and any obstruction. Gas systems receive manifold pressure testing, thermocouple millivolt verification, and combustion analysis. You watch the camera feed live and receive digital photos within 24 hours.
- 4
Written price and scope before any work. Clause 1 of the Haven Standard requires a written price, written scope, and written warranty before anyone starts work. Not after diagnosis. Not after the tech is in your home. We explain what we found, what it means, what can wait, and what can’t, with dollar amounts attached to each option. You choose what to authorize.
- 5
Execution, documentation, and follow-up. Approved work is completed with materials from our Haven buying network, photographed at completion, and backed by our 365-Day Done Right Promise. You receive a final report with before-and-after photos, warranty terms, and maintenance recommendations specific to your fireplace type and Fort Worth’s climate conditions.
How Much Does Fireplace Services Cost in Fort Worth?
| Service Type | Typical Range in Fort Worth | What Affects Price |
|---|---|---|
| Gas fireplace tune-up and safety inspection | $195 - $295 | Accessibility of burner assembly, need for thermocouple or igniter replacement, direct-vent vs. vent-free configuration |
| Wood burning fireplace sweep and Level 2 inspection | $275 - $425 | Creosote class (I through III), liner material and condition, need for rotary vs. standard brushing |
| Fireplace insert service with liner inspection | $325 - $495 | Flex liner length and diameter, collar corrosion severity, blower motor amp draw failure |
| Damper repair or top-damper installation | $385 - $675 | Throat vs. top-sealing design, stainless vs. galvanized components, chase height for top-mount access |
| Firebox repair, partial rebuild, or HeatShield resurfacing | $650 - $2,400 | Surface area affected, need for rear wall cavity inspection, extent of spalling depth |
| Full fireplace conversion (wood to gas insert) | $3,200 - $6,800 | Insert BTU rating, liner sizing and length, gas line extension needs, permit and inspection fees |
These ranges reflect how much Fireplace Services costs in Fort Worth’s current market for documented, camera-inspected work with written warranties. Prices below $150 for a “sweep and inspection” typically indicate a flashlight look without camera documentation, no written report, and no liability protection for the technician or homeowner. We don’t compete at that level because it isn’t inspection; it’s a guess.
Several factors specific to Fort Worth affect your final price. Homes in Benbrook and White Settlement with limestone veneer over the chimney chase often require additional access time. Properties in the 76104 and 76110 ZIP codes with original 1920s-1940s construction may have unlined flues requiring liner installation before any other service can be performed safely. Seasonal demand peaks in October through December can extend scheduling but do not affect our pricing structure.
To avoid overpaying, request that any competitor’s quote specify: whether camera inspection is included or additional, whether the price covers all accessible flues or just the main firebox, and what warranty term applies. Our Free Second Opinion on any written estimate lets you compare apples-to-apples. Every Level Two Chimney Fort Worth estimate includes the camera scan, photo record, written scope, and warranty term before you commit.
Fireplace Services Near Fort Worth - Our Service Area
Level Two Chimney Fort Worth serves the full Tarrant County metro including Fireplace Services in River Oaks, Fireplace Services in Haltom City, Lake Worth, Saginaw, White Settlement, Watauga, Forest Hill, North Richland Hills, Benbrook, Keller, and Bedford. Most properties within Loop 820 receive next-available scheduling within three to five business days during standard seasons; outer areas like Weatherford-adjacent Aledo or southern Mansfield typically schedule within seven to ten days. Emergency gas leak response is immediate; call (682) 499-2712 and our live dispatcher coordinates priority dispatch.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Fireplace Services in Fort Worth
Fireplace services include inspection, cleaning, repair, and conversion work for both gas and wood-burning systems, with sub-services covering gas valve tuning, firebrick repair, damper restoration, insert maintenance, and fuel-type conversion. Every visit from Level Two Chimney Fort Worth includes an NFPA 211 Level 2 camera inspection and documented photo record under Haven Standard Clause 4. You’ll receive a written price before work begins and a 365-Day Done Right Promise on all completed work.
A standard gas fireplace tune-up and inspection takes 60 to 75 minutes; a wood-burning sweep with Level 2 inspection runs 90 to 120 minutes depending on creosote accumulation and liner accessibility. Firebox repairs or conversion consultations require 2 to 4 hours including cure time for refractory materials. We schedule realistic windows and text you when your technician is en route so you’re not waiting indefinitely.
Expect $195 to $295 for gas service, $275 to $425 for wood-burning sweep and inspection, and $650 to $2,400 for firebox repairs depending on severity. Full conversions run $3,200 to $6,800. We publish these ranges because Haven Standard Clause 1 requires written pricing before work starts, not hidden figures revealed after arrival. Call (682) 499-2712 for an exact quote on your specific fireplace - estimates are free and include the camera inspection.
Yes. We’ve repaired and maintained thousands of HeatShield, DuraFlex, and Gelco systems across Fort Worth, with factory-authorized materials and application training. We stock common replacement components and can source specialty items through our Haven buying network within 48 hours. Bring us any competitor’s written quote for these brands and we’ll provide a Free Second Opinion with our own camera documentation.
Our live phone support operates 24 hours a day, 7 days a week, and we prioritize gas leaks, carbon monoxide alarms, and structural chimney damage for same-day response when safety is compromised. Non-emergency scheduling runs standard business hours with weekend availability October through March. Call (682) 499-2712 any time; if your situation requires immediate evacuation, do so first and call from a safe location.
Every job carries our 365-Day Done Right Promise: if it’s not done right, we make it right at no additional charge. Material warranties vary by component, DuraFlex liners carry a lifetime warranty, and HeatShield applications include a 20-year performance guarantee when applied to manufacturer specification. All warranty terms are written and provided before work authorization, not verbal promises.
Clear a 6-foot workspace around the fireplace, remove decorative items from the mantel, and ensure access to your electrical panel if the service includes blower or igniter testing. For gas systems, verify your main gas shutoff location. Do not light a fire within 24 hours before our arrival; we need a cold system for safe inspection. We’ll handle floor protection, tool setup, and cleanup; your preparation is minimal.
Schedule Your Fireplace Services Service in Fort Worth Today
Call (682) 499-2712 now and speak with a live person, any hour. We’ll schedule your NFPA 211 Level 2 inspection with camera documentation, provide a written price before any work begins, and back every repair with our 365-Day Done Right Promise. Your estimate is free, your photo record is included, and you’ll never hear “call for a quote” from us. Corrine Halstead and the team at Level Two Chimney Fort Worth are ready to show you exactly what your fireplace needs.
Written by Corrine Halstead, Owner at Level Two Chimney Fort Worth, serving Fort Worth since 2009.