Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Mansfield, TX
Chimney cap and crown work in Mansfield runs $285-$1,850 depending on whether we’re replacing a rusted sheet-metal chase cover on a prefab unit or rebuilding a masonry crown. Most calls come from homeowners in the 1990s-2010s build wave whose builder-grade chase covers have failed after 10-15 years of North Texas weather cycles. Call (682) 499-2712 for a written quote before any work starts.
Level Two Chimney Co. inspects every Mansfield chimney to NFPA 211 Level 2 standard, camera down the flue, with a documented photo record included as standard under Haven Standard Clause 4. Our crews serve Mansfield from our Dallas-Fort Worth office, and we’ve completed more than 38,000 chimney inspections and cleanings since 2009.
Why Mansfield Homes Are Different
Mansfield’s housing boom from the mid-1990s through the 2010s produced a city built almost entirely on prefabricated zero-clearance fireplaces, not traditional masonry. These factory-built units sit inside framed chases capped with galvanized or painted steel chase covers that corrode in North Texas rain, heat, and occasional ice cycles. In South Pointe and similar master-planned communities, nearly every house on a street shares the same builder-installed fireplace model from the same construction year, meaning when one chase cover fails, the whole neighborhood is on the same replacement timeline.
The region’s mild winters create another Mansfield-specific problem: homeowners burn wood only a few times yearly, producing low-heat smoldering fires that generate sticky Stage 2 creosote in flues that never fully warm up. This disproportionate hazard relative to actual usage catches many Mansfield homeowners off guard. For the minority of masonry chimneys in older pockets near downtown, expansive black-clay soils drive seasonal foundation movement that cracks mortar caps and brick veneer.
Our Main Mansfield Services
These are the three services Mansfield homeowners call about most often.
Chimney Cleaning & Sweep in Mansfield
We clean prefab and masonry flues throughout Mansfield, removing Stage 2 creosote buildup common in low-usage fireplaces and documenting condition with camera-scan inspection. Every sweep includes a written price before work starts and a photo record under Haven Standard Clause 4. Chimney Cleaning & Sweep in Mansfield
Chimney Repair in Mansfield
Our Mansfield repair work focuses on deteriorated refractory panels, crumbling factory fireboxes, and water-damaged chase enclosures in prefab units, plus mortar cap and brick veneer cracks in older masonry. We deliver a written scope and price before any repair begins. Chimney Repair in Mansfield
Fireplace Services in Mansfield
We service gas and wood-burning fireplace systems across Mansfield, including burner assembly cleaning, gas valve testing, and prefab firebox panel replacement. Every visit includes NFPA 211 Level 2 camera inspection with documented photo record. Fireplace Services in Mansfield
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Mansfield
Mansfield’s prefab fireplace population means most “cap” work is actually chase cover replacement on framed chases, not traditional masonry crown work. The galvanized steel covers installed by builders in the 2000s are now hitting their 15-20 year failure window, funneling water directly into fireboxes and destroying refractory panels. For the minority of masonry chimneys, crown cracks from clay soil expansion let water saturate brick and accelerate freeze-thaw damage. Our Chimney Cap & Crown service covers both conditions with upfront written pricing.
Chase Cover Replacement
Signs you need it
Rust stains running down the chase siding, water dripping into the firebox during rain, or visible corrosion holes in the sheet-metal cap.
What it costs in Mansfield
Chase cover replacement runs $285-$650 for standard prefab units, with custom-fabricated stainless steel caps at the higher end.
How we do it
We measure the chase opening, fabricate or order the replacement cover in galvanized or stainless steel, remove the deteriorated unit, and seal the new cover with proper counterflashing.
Crown Repair
Signs you need it
Visible cracks in the concrete crown, pieces of mortar missing, or water staining on interior chimney walls below the roofline.
What it costs in Mansfield
Crown repair ranges $450-$1,200 depending on crack severity and whether we apply a flexible coating or pour new concrete.
How we do it
We grind out cracked mortar, apply bonding agent, and pour new crown concrete sloped for drainage, or apply HeatShield crown coating for hairline cracks.
What Chimney Cap & Crown Costs in Mansfield
| Item | Typical range in Mansfield |
|---|---|
| Chase cover replacement (prefab) | $285 - $650 |
| Crown repair with coating | $450 - $1,200 |
| Full crown rebuild (masonry) | $850 - $1,850 |
How long does a chase cover last in Mansfield?
Builder-grade galvanized covers typically fail in 10-15 years in North Texas conditions; stainless steel replacements last 20+ years. We document crown and cover condition with photos so you can time replacement before water damage starts. Call (682) 499-2712 for a free inspection.
Can a cracked crown wait until next season?
Hairline cracks can be coated if caught early, but open cracks through the crown let water saturate brick and worsen every freeze-thaw cycle. We show you the camera footage and write the price before any work starts, so you decide with full information. Call (682) 499-2712 for a written quote.
Chimney Liner & Rebuild in Mansfield
Mansfield’s aging prefab fireplaces are hitting a critical point: refractory panels crack and crumble after 15-25 years of thermal cycling, and the thin aluminum or stainless flue liners in these factory-built units corrode or separate at joints. For masonry chimneys in older neighborhoods, original clay tile liners crack from foundation movement or decades of acidic condensation. Our Chimney Liner & Rebuild service installs DuraFlex and HeatShield products sized to your specific system.
Stainless Steel Liner
Signs you need it
Visible gaps or corrosion in the prefab flue pipe, pieces of clay tile in the firebox, or a Level 2 camera scan showing liner separation.
What it costs in Mansfield
Stainless steel liner installation runs $1,800-$3,500 for most residential flues, with flexible DuraFlex liners for offset chimneys at the higher end.
How we do it
We run a camera to map the flue, pull a properly sized DuraFlex liner with insulation wrap, and connect it to a new top plate and rain cap.
Liner Replacement
Signs you need it
Corrosion holes in the existing liner, collapsed sections blocking draft, or a home sale inspection flagging the liner as unsafe.
What it costs in Mansfield
Liner replacement ranges $2,200-$4,500 depending on flue length, diameter, and whether the surround needs refractory panel replacement.
How we do it
We remove the damaged liner and surrounding refractory panels, install the new liner system, and replace panels with OEM or compatible HeatShield materials.
What Chimney Liner & Rebuild Costs in Mansfield
| Item | Typical range in Mansfield |
|---|---|
| Stainless steel liner installation | $1,800 - $3,500 |
| Liner replacement with panels | $2,200 - $4,500 |
| Partial rebuild (firebox and surround) | $3,500 - $6,500 |
Do I need a new liner or just a sweep?
A Level 2 camera inspection shows the difference: intact liners get swept, cracked or separated liners need replacement. We show you the footage and write the price before any work starts. Call (682) 499-2712 for a free inspection.
Can you match my prefab fireplace parts?
We source replacement panels, doors, and liners through Haven’s buying network from DuraFlex, HeatShield, Gelco, and other manufacturers, with most common Mansfield prefab models in stock or available within a few days. Call (682) 499-2712 to confirm fitment.
Brands We Service in Mansfield
We stock and install parts from DuraFlex, HeatShield, Gelco, Olympia Chimney, and Copperfield through Haven’s buying network, with most chase covers, liners, and refractory panels available for Mansfield installation within 1-3 business days. our brands
Pricing for Chimney Cleaning in Mansfield, TX
| Service | Typical range in Mansfield |
|---|---|
| Chimney sweep with Level 2 inspection | $175 - $285 |
| Chase cover replacement (prefab) | $285 - $650 |
| Crown repair with coating | $450 - $1,200 |
| Full crown rebuild (masonry) | $850 - $1,850 |
| Stainless steel liner installation | $1,800 - $3,500 |
| Liner replacement with refractory panels | $2,200 - $4,500 |
| Partial firebox rebuild | $3,500 - $6,500 |
| Full chimney rebuild | $8,500 - $15,000 |
Prices in Mansfield run higher for multi-flue chases, steep roof access, and custom-fabricated stainless components. Every job gets a written price, written scope, and written warranty before work starts under Haven Standard Clause 1.
Neighborhoods We Serve in Mansfield
We work across Mansfield’s full build spectrum, from 1990s subdivisions with original prefab fireplaces to newer developments and the older masonry pockets near downtown. Crews typically schedule within 2-3 business days.
- South Pointe
- Thornberry
- Thornhill
- Mansfield National
- Thornridge
Service Area - Cities Near Mansfield
Level Two Chimney Co. serves Mansfield and surrounding communities from our Dallas-Fort Worth office. We regularly dispatch to Arlington, TX, Burleson, TX, Grand Prairie, TX, and Fort Worth, TX for chimney cap, crown, liner, and rebuild work.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Mansfield
Most chimney repairs and liner replacements in Mansfield require a permit through the city’s Building Inspections division; we handle permit application as part of our scope when required. Call (682) 499-2712 and we’ll confirm whether your specific job needs permitting.
We typically book Level 2 inspections within 2-3 business days in Mansfield, with repair work scheduled after you review the written quote and photo documentation. Live phone support is available 24/7 to check availability.
Mansfield’s master-planned communities including South Pointe may require HOA architectural review for exterior chimney modifications; we provide written scope and manufacturer specifications to support your application. Call (682) 499-2712 for documentation.
Ready for a written quote? Call (682) 499-2712 for free estimate on chimney cap, crown, liner, or rebuild work in Mansfield. Every job includes NFPA 211 Level 2 camera inspection, documented photo record, and our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mansfield Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.