Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFamco Fireplace Services in Fort Worth: What to Know First
We provide independent Famco fireplace services in Fort Worth, typically scheduling within 3-5 business days and completing most repairs in a single visit. Every job starts with a written price before work begins - no exceptions, no surprises. If you own a Famco gas fireplace, wood-burning unit, or insert and need service, repair, or conversion work in Fort Worth, call us at (682) 499-2712 for a free estimate. Corrine Halstead and our crew have handled Famco products across the city, from the older units tucked into Fairmount bungalows to newer installs in the Cultural District where homeowners bought between 2015 and 2025 and want documentation they can show their insurer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Famco Products Fail - and How We Fix Them
- Famco direct-vent gas fireplaces (DV Series): intermittent ignition or pilot dropout. The SIT valve and thermopile assembly on DV units from the 2012-2018 production run are sensitive to Fort Worth’s voltage fluctuations during summer peak demand. We test millivolt output under load, replace the thermopile with an OEM-spec component sourced through our Haven buying network, and clock the gas pressure before we leave. The camera doesn’t lie - and neither does the written estimate.
- Famco wood-burning fireboxes (FW Series): cracked or shifted refractory panels. FW units installed during the 2015-2019 building boom often show thermal shock cracking at the rear panel corners, especially where homeowners overfire during Fort Worth’s brief but sharp cold snaps. We measure panel thickness, photograph the cracks per Haven Standard Clause 4, and install replacement panels cut to spec - OEM when available, HeatShield refractory mix when the factory panel is back-ordered.
- Famco fireplace inserts (FI Series): blower motor noise or failure. The OEM blower on FI inserts runs at a fixed speed and draws dust through the housing; after 6-8 years the bearing wears and the housing warps. We pull the blower, check amp draw against the nameplate, and install a replacement from our Gelco or Olympia Chimney inventory that matches CFM and fits the original bracket pattern without modification.
- Famco top-sealing dampers: cable seizure or incomplete seal. Famco’s cable-driven dampers corrode where the cable exits the flue tile, particularly in Fort Worth homes with clay-tile liners that breathe moisture during our humid spring months. We inspect the cable run with a chimney camera, replace the cable and pivot assembly if the housing is sound, or recommend a Gelco or Copperfield replacement damper if the frame has warped from heat cycling.
- Famco gas-to-wood conversions: improper venting or liner mismatch. We see this most in 1970s-1980s Fort Worth ranch homes where a previous owner dropped a Famco gas insert into a wood-burning fireplace without a proper liner connection. Our NFPA 211 Level 2 inspection documents the flue condition, and we size a DuraFlex stainless liner or recommend a full firebox rebuild if the original throat and smoke chamber are too deteriorated for safe wood-burning operation.
Our Famco Fireplace Services Process
- 1
Call and schedule. A live person answers, 24/7. We book a window, text you when the tech is en route, and send a named, background-checked technician in uniform.
- 2
NFPA 211 Level 2 inspection. Camera down the flue, photos of the firebox, damper, and gas connections. We document everything before touching a tool.
- 3
Written price and scope. Clause 1 of the Haven Standard: you get a written price, written scope, and written warranty before work starts. No verbal quotes, no “we’ll see how it goes.”
- 4
Parts decision. We stock Famco-compatible components from DuraFlex, HeatShield, Gelco, Olympia Chimney, and Copperfield. If OEM is available and cost-competitive, we use it. If aftermarket matches spec and saves you money without voiding any remaining warranty, we explain the trade-off and let you choose.
- 5
Repair, test, and document. We complete the work, run the unit through its full cycle, check gas pressure or draft readings, and add the photos and readings to your job record under Haven Standard Clause 4.
- 6
Cleanup and follow-up. We leave the work area as we found it. Your documented photo record is available if you need it for insurance, resale, or your own files. The 365-Day Done Right Promise applies from day one.
Before
AfterWhat Famco Fireplace Services Costs in Fort Worth
| Service | Typical Range |
|---|---|
| Famco gas fireplace tune-up and safety check | $189-$275 |
| Famco pilot/ignition repair (thermopile, SIT valve) | $240-$425 |
| Famco refractory panel replacement (FW Series) | $380-$650 |
| Famco insert blower motor replacement | $295-$480 |
| Famco damper cable repair or replacement | $220-$395 |
| Famco gas-to-wood conversion with liner | $2,800-$4,500 |
What moves the price: accessibility of the firebox, whether the unit is still in production, and whether we find secondary issues during the camera inspection - a cracked flue liner, for example, or a smoke chamber that needs parging. We show you the photos and explain what’s urgent versus what can wait. Call (682) 499-2712 for an exact quote - estimates are free, and we offer a free second opinion on any competitor’s written estimate.
Why Fort Worth Homeowners Call Level Two Chimney Fort Worth for Famco Work
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented record when done. Our technicians know Famco products specifically - not just generic gas fireplace repair - and we stock the parts that fit without jury-rigging. Because we’re independently owned and operated, not a franchise, decisions about your job get made in Fort Worth, not at a regional office. The Haven Standard governs everything we do: Clause 4 means your photo record is standard, not an upsell. Clause 1 means the price is on paper before the wrench turns. And our 365-Day Done Right Promise means if it’s not right, we make it right.
FAQs
No - routine maintenance and repair by a qualified technician does not void your Famco warranty, though installing non-OEM parts can affect coverage on specific components if a failure is traceable to that part. As an independent Famco service provider, we document every part we install and flag any warranty implications before we start. Call (682) 499-2712 if you want us to review your warranty terms against the work you need.
Common Famco components - thermopiles, blowers, refractory panels for recent production - are in our Fort Worth warehouse or available within 2-3 business days through our Haven buying network. Discontinued Famco lines may require fabrication or aftermarket substitution; we tell you upfront if that’s the case and show you the equivalent spec from Gelco, Olympia Chimney, or Copperfield before ordering.
Repair makes sense when the firebox and venting system are sound and the repair cost is under 40% of a comparable new install. Replacement is the better call if the flue liner is compromised, the unit is more than 20 years old, or Famco has discontinued the parts series and aftermarket equivalents are scarce. We give you the camera footage and a written comparison of both paths - no pressure either way. Call (682) 499-2712 to schedule the inspection.
Gas Famco fireplaces should be inspected annually and cleaned as needed - Fort Worth’s hard water and dust load can clog burner ports and corrode ignition components faster than coastal climates. Wood-burning Famco units need annual sweeping and inspection, or more often if you burn more than two cords per season. We check creosote class (Class I, II, or III) and liner condition every time, documented with photos under Haven Standard Clause 4.
Gas units accumulate debris that restricts burner flow and can produce carbon monoxide; wood units build creosote that ignites at 451°F and can crack the flue liner, sending flames into wall cavities. In Fort Worth, we’ve seen both scenarios - the gas unit with a partially blocked burner producing headaches the homeowner blamed on allergies, and the wood unit that hadn’t been swept since the previous owner. Neither is theoretical. The inspection finds what’s actually there; the written estimate tells you what it costs to fix. Call (682) 499-2712 to book.
Written by Corrine Halstead, Owner, Level Two Chimney Fort Worth at Level Two Chimney Fort Worth, serving Fort Worth and nearby areas.