Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in Fort Worth: What to Know First

We provide independent Olympia Chimney chimney liner & rebuild service in Fort Worth, typically turning around liner replacements in 1-2 business days once we’ve run the camera and agreed on a written scope. Most Olympia Chimney stainless steel liner jobs in Fort Worth run $2,800-$4,200 installed, with full rebuilds starting around $6,500 depending on height and access. We don’t start work until you have a written price, a written scope, and a written warranty in hand - that’s Clause 1 of the Haven Standard, and it’s how we’ve operated since 2009.

Call (682) 499-2712

This page is for Olympia Chimney owners in Fort Worth, Benbrook, and the near west side who’ve been told they need liner work or a partial rebuild and want to know what they’re actually paying for. If you’re staring at a competitor’s estimate and wondering whether the scope is right, bring it to us - our Free Second Opinion is exactly what it sounds like. Call (682) 499-2712 when you’re ready.

How Olympia Chimney Products Fail - and How We Fix Them

• Olympia 316Ti flexible liners in pre-2015 installs: We see these throughout Fort Worth’s 76107 and 76110 zip codes, often in homes where the original installer sized the liner to the fireplace opening rather than the appliance. The result is over-firing, accelerated weld-seam fatigue at the flex points, and a liner that fails inspection while still looking shiny from below. We pull the old liner, re-measure to the appliance’s BTU output and the flue’s true interior dimensions, and install a properly sized replacement - sometimes Olympia, sometimes DuraFlex when the geometry demands tighter flex radius.
• Olympia Pro-Steel rigid liners with spalling clay surround: The Pro-Steel series is built to last, but it’s not built to hold up a collapsing clay flue. In Fort Worth’s Cultural District and older Mistletoe Heights homes, we’ve found the rigid liner essentially suspended in mid-air where the surrounding terra cotta has turned to gravel. Our fix is a partial rebuild of the flue wall, then re-seating the Pro-Steel with proper compression fit and a stainless top plate - not a shortcut collar that’ll leak in five years.
• Olympia chimney caps with integrated spark arrestors on gas conversions: Homeowners switch to gas inserts and keep the original Olympia cap, not realizing the mesh arrestor is sized for wood particulate and now chokes the smaller, cooler gas exhaust. Condensation backs up, the liner crown soaks, and we get a call about “water in the fireplace.” We swap to a gas-appropriate cap or modify the existing Olympia cap with correct mesh sizing - whichever the owner prefers, priced both ways in writing.
• Olympia Heat-Fab SAF-T liner in exterior chase applications: Fort Worth’s clay soil and seasonal expansion put exterior chimneys through more movement than interior flues. The SAF-T’s interlock seam is solid, but if the original installer skipped the expansion joint at the top, we’ve watched the liner compress and buckle over two or three hot Texas summers. We cut back to sound metal, install a proper expansion joint, and sleeve with a new Olympia or Gelco section - your call, with the warranty difference explained on the page.
• Olympia oval-to-round adapters in fireplace insert retrofits: These adapters are where DIY and handyman jobs go to die. The oval outlet on your insert doesn’t mate cleanly to a round liner without precise crimping and a proper seal - and we’ve pulled adapters in Fort Worth homes where someone used three wraps of foil tape and optimism. We fabricate or source the correct Olympia adapter, seal with high-temp silicone rated to 600°F, and pressure-test the joint before we leave. The camera doesn’t lie - and neither does the written estimate.

Our Olympia Chimney Chimney Liner & Rebuild Process

1. 1
   Call and schedule. A live person answers, checks availability in Fort Worth or your nearby area, and books a Level 2 inspection. You’ll get a text when your tech is en route - name, photo, license number included.
2. 2
   Camera-scan inspection. We run the camera the full flue length per NFPA 211 Level 2, document every foot, and note liner condition, joint integrity, and any spalling or creosote buildup. You watch the feed if you’re home.
3. 3
   Written diagnosis and price. Before any work is discussed, you get a written scope with photos, a line-item price, and a clear call on OEM Olympia parts versus quality aftermarket alternatives. No verbal quotes. No “we’ll see once we start.”
4. 4
   Parts procurement and install. We source through Haven’s buying network - Olympia Chimney, DuraFlex, HeatShield, Gelco, Famco, Copperfield - whichever matches the spec and your budget. Install day: drop cloths, uniformed crew, old liner out, new liner in, proper connections, top plate and cap secured.
5. 5
   Smoke test and final documentation. We run a smoke pellet or pressure test per local code, then deliver your documented photo record: before, during, after. Clause 4 of the Haven Standard requires it, and we’ve done it on all 38,000+ jobs since 2009.
6. 6
   Warranty and follow-up. The 365-Day Done Right Promise is stamped on your paperwork. If it’s not right, we make it right. No argument, no runaround.

Before

After

What Olympia Chimney Chimney Liner & Rebuild Costs in Fort Worth

These are real Fort Worth numbers from jobs we’ve done in 76107, 76109, 76110, and 76116 - not national averages padded for your zip code. Every estimate is free, written, and binding. Call (682) 499-2712 to schedule yours.

Why Fort Worth Homeowners Call Level Two Chimney Fort Worth for Olympia Chimney Work

Corrine Halstead has been running chimney crews across Fort Worth for the better part of two decades, including plenty of calls near the Cultural District where older homes hide older problems. She learned the trade at Apex Technical School in Manhattan, then put in years of hands-on work before the camera-and-report side became second nature. That background shows up in how our techs talk to Olympia Chimney owners: they name the part, name the failure mode, and name the price before asking for a signature.

We’re independently owned and operated - not a franchise, not affiliated with Olympia Chimney - and we back every job with the Haven Standard: written price before work starts (Clause 1), verified crews who text when they’re en route (H.A.V.E.N.), and a documented photo record on every visit (Clause 4). If your Olympia liner job turns out to need DuraFlex flex for a tight offset, or HeatShield for a smoke chamber parged over damaged brick, we source it through our network and explain the switch in writing. No surprises. No “trust me.”

The 365-Day Done Right Promise covers every liner and rebuild we touch. If it’s not done right, we make it right. That’s not a slogan - it’s stamped on your job record.

FAQs