Chimney Cleaning & Sweep in Fort Worth - One Flat Price, You See What We See

Trusted Chimney Cleaning & Sweep for Fort Worth Homeowners

A professional chimney cleaning and sweep in Fort Worth typically costs $189-$379 for a standard single-flue system, with Level 2 camera inspections running $289-$449 depending on roof height and flue condition. We’re Level Two Chimney Fort Worth, and we’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented photo record when it was done. If you’re in Fort Worth, River Oaks, Haltom City, or anywhere in Tarrant County, call us at (682) 499-2712 for a free estimate with upfront pricing.

Call (682) 499-2712

Fort Worth’s clay-heavy soils and freeze-thaw cycles do something specific to chimneys. We’ve found that homes in neighborhoods like Berkeley Place, Mistletoe Heights, and the Fairmount Historic District, many built between 1920 and 1960, develop vertical crown cracks that let water migrate behind the brick. In newer construction around Walsh Ranch and Alliance Town Center, we’re seeing thinner stainless liners paired with factory-built fireplaces that accumulate Class II glazed creosote faster than masonry systems because they burn cooler. We don’t guess at any of this. Our technicians run a camera down every flue we touch, document what we find, and give you a written price before anyone picks up a tool. That’s Clause 1 of the Haven Standard: have it in writing.

Corrine Halstead leads our Fort Worth operation, and every technician on her crew is background-checked, uniformed, and licensed. You’ll get a text when your tech is on the way, a written scope and warranty before work begins, and a photo record you can forward to your insurer or home inspector. Live phone support runs 24 hours a day, 7 days a week. No voicemail trees, no web forms that disappear into the void.

What Our Chimney Cleaning & Sweep Service Includes

Level 1 Inspection

A Level 1 Inspection is a visual examination of readily accessible portions of your chimney exterior, interior, and appliance connection. You need this annually if your system hasn’t changed and you’re burning the same fuel as last season. At Level Two Chimney Fort Worth, we still document our Level 1 findings with photos of the firebox, damper, and accessible flue sections, and we flag anything that warrants a Level 2 camera scan before we leave your driveway.

Level 2 Inspection

A Level 2 inspection is the NFPA 211 standard for real estate transactions, property transfers, or anytime your appliance or flue liner has changed. We lower a high-resolution camera the full length of your flue, scan the smoke chamber, and inspect the attic and crawl space where the chimney passes through. Since 2009, we’ve made this camera documentation standard on every job, not an upsell. That practice became Clause 4 of the Haven Standard. In Fort Worth’s older homes, we regularly find deteriorated terra cotta flue tiles, missing mortar joints, and gaps at the thimble that a flashlight inspection would miss entirely.

Creosote Removal

Creosote is the tar-like combustion byproduct that builds up on flue walls, and it comes in three classes. Class I is flaky soot we can remove with standard brushes. Class II is hardened, glassy deposits that require mechanical whipping or chemical treatment. Class III is the glazed, tar-coated buildup that restricts airflow and ignites at temperatures as low as 451 degrees Fahrenheit. We assess creosote class during our camera scan and quote Creosote Removal specifically, never as a generic “sweep” that might leave dangerous residue behind. In Fort Worth, where oak and mesquite are common firewood choices, we see more Class II and III buildup than companies in pine-dominant regions.

Soot Removal

Soot is the fine carbon powder that coats firebox walls, smoke shelves, and damper assemblies. Beyond the mess, accumulated soot can interfere with damper operation and recirculate into your living space. We remove soot with HEPA-contained vacuums and hand tools, then inspect the smoke shelf, that horizontal surface behind the damper where debris collects and can block proper drafting. In Fort Worth homes with gas log sets converted from wood-burning, we often find degraded artificial embers mixed with soot that previous sweeps missed.

Annual Sweep

An Annual Sweep is preventive maintenance for actively used wood-burning, gas, or pellet systems. The National Fire Protection Association recommends this interval for all solid-fuel appliances, and most homeowner insurance policies require documentation of professional maintenance. We schedule your annual sweep with a reminder system, pull your prior year’s photo record for comparison, and note any degradation since our last visit. In Fort Worth’s climate, where summer humidity can accelerate metal component corrosion and winter thermal cycling stresses masonry, year-over-year comparison often catches problems before they require major repair.

Fireplace Cleaning

Fireplace Cleaning addresses the visible and functional components: firebox refractory panels, grate and andiron condition, gas log placement and orifice inspection, and glass door or screen operation. We check for cracked refractory panels that expose surrounding combustibles to direct flame, misaligned gas logs causing sooting, and deteriorated door gaskets that leak conditioned air when the fireplace isn’t in use. For Fort Worth homeowners who use their fireplaces primarily for ambiance, this service often reveals that the system hasn’t been configured correctly since installation.

Brands We Service for Chimney Cleaning & Sweep

We’ve serviced and cleaned hundreds of systems built with DuraFlex stainless steel liners, particularly in Fort Worth homes where original clay flue tiles have spalled beyond repair. DuraFlex’s corrugated design accommodates offset chimneys common in 1940s and 1950s construction around Como and Stop Six, and we stock their connector components through Haven’s buying network to keep replacement timelines short.

HeatShield cerfractory flue resurfacing is another specialty. We’ve restored dozens of deteriorated smoke chambers and flue walls in Fort Worth’s historic districts with HeatShield’s pumped application, avoiding the cost of full liner replacement when the structural shell remains sound. For factory-built fireplaces, we regularly service units with Gelco chimney caps and chase covers, especially in neighborhoods like Tanglewood and Westover Hills where custom copper finishes are specified by HOA guidelines. Whether your system uses DuraFlex, HeatShield, Gelco, or any other make, we can inspect, clean, and repair it with documented results.

Before

After

Signs You Need Chimney Cleaning & Sweep Right Now

• Smoke backing up into the room. If your fireplace smokes when you light it, or if you smell smoke in upstairs bedrooms after a fire, your flue may be partially blocked by creosote buildup, a bird nest, or a collapsed flue liner. Don’t burn again until a camera inspection confirms the airway is clear. In Fort Worth, we’ve found squirrel nests in chimneys as late as November, when animals seek winter shelter.
• Black, oily residue on the damper or firebox walls. This is Class II or III creosote, and it means your fires are burning too cool or you’re using unseasoned wood. The residue is combustible and restricts flue diameter, which compounds the problem by reducing draft. We measure creosote thickness during camera inspection and quote removal by class.
• A strong, acrid odor in summer. Heat and humidity activate creosote deposits, producing a sharp, tar-like smell that permeates the house through the chimney chase. This isn’t just unpleasant; it indicates significant buildup that will ignite more readily come fall. We treat this with chemical creosote modifiers followed by mechanical removal.
• White or green staining on the exterior brick. Efflorescence (white) indicates water migrating through the masonry; green staining suggests algae growth from chronic moisture intrusion. Both mean your crown, cap, or mortar joints are compromised, and water is accelerating deterioration of the flue liner from the outside. We document this with exterior photos and include crown repair in our written scope.
• It’s been more than 12 months since your last professional service. The NFPA 211 standard is clear: annual inspection for all chimney systems, more frequent for heavy use. If you can’t produce a dated photo record from your last sweep, you don’t know what condition your flue is in. We start every new client relationship with a Level 2 camera inspection so we’re both working from the same facts.

Our Chimney Cleaning & Sweep Process - Step by Step

1. 1
   Schedule and confirm. Call (682) 499-2712 and you’ll reach a live person, any hour. We confirm your address, note roof access and any gate codes, and assign a named technician. You’ll get a text when they’re en route with an estimated arrival window.
2. 2
   Arrival and protection. Your technician arrives in a marked vehicle, in uniform, with license information visible. We lay protective floor coverings from the entry to the fireplace, set up HEPA-contained vacuums, and inspect the work area for any pre-existing conditions worth documenting.
3. 3
   Camera-scan inspection. Before any cleaning begins, we run a high-resolution camera the full length of your flue. You see the live feed on a tablet. We document liner condition, creosote class and thickness, joint gaps, obstructions, and any signs of water intrusion or spalling. This is Clause 4 of the Haven Standard, and we’ve done it on every job since 2009.
4. 4
   Written price and scope. We present a written price for exactly the work your chimney needs, with no open-ended hourly rates. The scope specifies what’s included, what materials we’ll use, and what warranty applies. Clause 1 of the Haven Standard requires this before any work starts. You approve in writing, or we pack up and leave with no charge for the inspection.
5. 5
   Cleaning, documentation, and walkthrough. We perform the agreed work, then run the camera again to verify results. You receive a dated photo record, a written summary of findings, and a warranty document stamped with our 365-Day Done Right Promise. If anything’s not right, we make it right.

How Much Does Chimney Cleaning & Sweep Cost in Fort Worth?

Chimney Cleaning & Sweep Near Fort Worth - Our Service Area

We cover Fort Worth proper and the full ring of Tarrant County suburbs. Typical drive times from our dispatch point put us in River Oaks in 15 minutes, Haltom City in 20, Lake Worth and Saginaw in 25, White Settlement and Watauga in 20, Forest Hill and North Richland Hills in 30, Benbrook and Keller in 25, and Bedford in 35. We also serve the historic core, the Medical District, and the growing developments around home base in central Tarrant County. If you’re unsure whether we cover your address, call and we’ll confirm.

Frequently Asked Questions - Chimney Cleaning & Sweep in Fort Worth

Schedule Your Chimney Cleaning & Sweep Service in Fort Worth Today

Call (682) 499-2712 now and reach a live person, any time of day. We’ll schedule your free estimate, assign a named technician, and deliver a written price before any work starts. Every job includes a camera-scan inspection, documented photo record, and our 365-Day Done Right Promise. No obligation, no surprises, no voicemail.

Written by Corrine Halstead, Owner at Level Two Chimney Fort Worth, serving Fort Worth, River Oaks, Haltom City, and surrounding Tarrant County communities since 2009.